Edge Slab Box with Glass

Check out these cnc cutting services images:

Edge Slab Box with Glass

Image by Caliper Studio
Center stringer convenience stair connects two office floors in Starret Lehigh building. Stringer and slab edge assemblies are blackened. Twenty four stainless steel treads are welded to the stringer form a continuous ribbon. 1 1/4" diameter handrail posts are continuous bent "C" shapes that wrap around treds and are welded to stringer. Stair was delivered to site in one piece [24′ long 3′ wide 3′ tall @ 2000lbs. Glass is two 1/2" layers of low iron tempered glass with PVB interlayer. Each panel is a 148.375"x41.25" rectangle that weighs 522lbs. Cut out in concrete floor is trimmed with a box of 1/2" thick blackened steel that was fully prewelded in the shop. The box picks up the load at top of stair and serves as a custom base shoe for the glass.

Design by Diller Scofidio + Renfro

Detailing, Fabrication and Installation by Caliper Studio. Caliper Studio engaged Eckersley O’Callaghan & partners for engineering services.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s